Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

s
     Autoclave for liquids and solids sterilization “Autester ST DRY PV llI” 25

     Autoclave for sterilization “Autester ST DRY PV” Class B

Autoclave for liquids and solids sterilization “Autester ST DRY PV llI” 25
FEATURES
  1. Sterilization chamber and lid made from AISI 316 stainless steel.
  2. External case epoxy coated.
  3. Digital control of all autoclave operations.
  4. Large back lit LCD 2 x 24 character display.
  5. Air filter, purifies air before entering in the sterilization chamber.
  6. Separate clean water reservoir and waste water.
  7. RS-232 Interface output of parameters to a computer or for printer.
  8. USB output for PEN-DRIVE data logging and Computer connection.
Safety
  1. Safety valve.
  2. Prevents the door being opened if under pressure or high temperature is produced.
  3. Temperature safety thermostat.
  4. Door closed correctly detector
  5. Thermally protected lid.
MICROPROCESSOR FUNCTIONS
Controlled parameters are:
1. E 2PROM
2. RTC FAULT
3. SENSOR PRECISION
4. HEATER PROBE
5. CHAMBER PROBE
6. OVER PRESSURE
7. VACUUM
8. PRESSURE
9. BOILER TEMPERATURE
10. TEMPERATURE LOW FAULT
11. INPUT ERROR
12. STERILIZATION
13. LEVEL 1
14. LEVEL 2
15. DOOR
16. PRINTER NO PAPER
17 PAPER JAM
18. ELECTRICAL FAULT
MESSAGES:
• Sterilization temperature from 105°C up to 134°C.
• Sterilization time from 3’ to 59’.
• Drying time from 20’ to 60’.
• Up to 10 user-configurable programs.
• Six operating modes:
- Solid 1 - Solid 2 fractions. - Solid 3 fractions - Drying - Liquids - Liquids 2 probes
• Verification test
- Vacuum - Bowie Dick.
• Settings:
- Units – languages (Spanish, English, French). - USB or printer module. - Clock:
date/time. - External water: on/off. • Password
• Calibration
- Temperature probe 1 - Temperature probe 2 - Water dosing.
• Audible and visual alarm for over temperature and insufficient temperature.
• Network failures detection and memorization
• Safety thermostat by software
• Sterilization cycles data logging with capacity for over 500 cycles.
• Internal cleaning program
• Software for PC
• Temperature correction
• Summarized user manual on screen
• Graphical representation of real time process