Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

THERMOSTAT DRY-BLOCKS
WITH DIGITAL ELECTRONIC CONTROL OF TEMPERATURE AND TIME
APPLICATIONS
Clinical, biochemical and chemical laboratories. Incubation of DNA, enzyme assays, residual testing in dairy, incubation and fusion of AGAR, cell culture. Thermo control to dry, boiling, evaporation, concentration, hydrolysis, digestion etc.

COMMON FEATURES
Dry block systems have several advantages over wet contact methods such as: no risk of evaporation of heating liquid, higher working temperatures, better long term temperature stability and no sample cross contamination or germination of bacteria in the bath. Digital temperature calibration. Timer from 1 to 999 nutes or continuous operation. Over temperature alarm. Heating elements are distributed evenly across the contact surface maintaining an even distribution of heat. Easy to use digital temperature and time control with a digital display (3 Digits). Built in temperature sensor Pt 100. Interchangeable blocks made of anodised DURAL alloy to accommodate a variety of tube diameters. (Customer specific sizes also available.) External case made of epoxy covered steel with an AISI 304 stainless steel top.
Dry block heater for tubes “Tembloc”
CONTROL PANEL
1. Digital display showing temperature and time in minutes.
2. Indicator show displayed parameter (Time or temperature.).
3. Push button selector to show time or temperature.
4. Push button increase displayed value.
5. Push button decrease displayed value.
6. Push button Start / Stop.
7. Over temperature alarm indicator.
Part No. Temperature °C Stability °C Homogeneity % Set error % Resolution °C Height / Width / Depth (bath) cm Power (w) Weight (Kg)
7462200 30 - 200 ±0.75 ±1.5 ±2 1 11   19   29 350 3.7
Dry Block heater for tubes “Multiplaces” CAPACITY: THREE
ACCESSORIES
Metal Blocks: 55 high x 95 wide x 75 mm deep.
Part No.
7000306 For 30 x 6 mm Ø tubes (total 3 blocks = 90 tubes).
7000716 For 20 x 1.5ml, Eppendorf tubes. (total 3 blocks = 60 tubes.)
7031220 For 20 x 12 mm Ø tubes (total 3 blocks = 60 tubes).
7031612 For 12 x 16 mm Ø tubes (total 3 blocks = 36 tubes).
7003208 For 8 x 20 mm Ø tubes (total 3 blocks = 24 tubes).
7001256 For 6 x 25 mm Ø tubes (total 3 blocks = 18 tubes).
7000717 Blank block without holes, can be customised to customer requirements.
7001474 Block for 15 cuvettes 10 x 10. Capacity: 3 blocks.
7001475 Block for 96 well microplates of 1.2 ml. Capacity: 1 block.
Part No. Temperature °C Stability °C Homogeneity % Set error % Resolution °C Height / Width / Depth (bath) cm Power (w) Weight (Kg)
7471200 30 - 200 ±0.75 ±1.5 ±2 1 11   31  31 700 6.4